|
| |

how we purify
The illustration above demonstrates what happens if oil is reclaimed properly at regular intervals. Purification is not a workable solution once an oil has severely degraded — but used properly on a preventive maintenance schedule, purification offers tremendous benefits.
As additive levels gradually drop due to consumption, a very small amount of oxidation will take place. But rather than allowing the oil to degrade to a point where it becomes unusable and unsalvageable, it can be purified and reclaimed, and
the additives can be restored to their original levels.
The fresh additives begin the next “life cycle” of the oil, and the same scenario can take place again and again and again: a very small amount of oxidation occurs, the oil is purified and reclaimed, and the additives are restored.
The net effect is that oxidation is controlled at very low levels, water and contaminants never build up to troublesome levels, and oil life can be extended continuously.
|
|
you set the specs...
CHEM-ECOL will meet
or exceed them!
|
|
|
| |
|
|
| |
|
| |
Oils we purify
- Hydraulic oils
- Gear oils
- Quench oils
- Heat-treating oils
- Heat-transfer oils
- Way lubricants
- Stamping oils
- Drawing oils
- Process oils
- Cutting oils (not water soluble)
- Phosphate ester fire resistant fluids
- Polyol ester fire resistant fluids
- Polyglycol fire resistant fluids
- Water-glycol fire resistant fluids
CHEM-ECOL does not accept engine oils, crankcase oils or other automotive products. We do not process PCB-contaminated oils.
All our equipment is drained and flushed between jobs to avoid cross-contamination.
|
|
|
|
| |
|
|
|
|